At long last, the much anticipated Mr Steele KISS PDB for the Alien frames has finally arrived!
Modelled
after the ideal build of Mr Steele himself, and using only his
preferred and tested components, the PDB is designed specifically for
Flyduino's KISS flight controller, and KISS 24A ESCs. By directly
soldering the power and signals from your ESCs and simply connecting the
two provided jumper cables, 90% of the work for an ultra-clean build is
done. Your fully KISSed Aliens will look more amazing than ever.
We
worked closely with Alexander Wolf, the creator of the KISS OSD
firmware, to make some custom modifications to his project specifically
for Mr Steele's requirements. A simple and clean default layout, without
sacrificing the power to tune your PIDs and filters or change your VTX
settings*. Of course you still get the full features and power of KISS
OSD, and can customize at will.
Dual cascading regulators, with
auxiliary filters, provide silky smooth power to give you some of the
cleanest video in the business. Fully 6S capable out of the box, you no
longer need to worry about the voltage input range on your video
transmitter when building that new monster power freestyle rig. Even
"Lipo" powered video transmitters which have poor regulation, and give
noise by default, are scrubbed clean when powered through the Mr Steele
PDB.
Stepping things up a notch for audio in FPV, we added a
quality electret microphone and paired it with an advanced amplifier
supporting automatic gain control, giving adjustments to audio levels in
real time! Power on your quad and put it on the ground, you can hear
conversations, footsteps, even insects. Punch-out in to the sky and the
amplifier detects the changed conditions and dynamically adjusts to
minimise wind noise and jarring clipping distortion.
This
PDB was specifically designed for our ImpulseRC Alien and if not used
in this application we cannot warranty replace this PDB. Please
understand that when used in other frames this is done at your own risk!
Kit Contents
- (1x) Mr Steele Alien PDB for KISS with built in OSD and Mic
- (1x) PDB insulator
- (2x) 6 Pin JST-SH male to male jumpers
- (1x) Genuine XT-60 with 12AWG Silicon wire
- (20mm) Open cell foam with adhesive backing (for Mic)
- (8x) M3 Press nuts - Stainless Steel
- (1x) M3x6 Cap - High Tensile Steel
- (1x) 1mm Spacer - Aluminium - Black